NWA110AX 802.11ax (WiFi 6) Dual-Radio PoE Access Point

Contact us

The NWA110AX is truly the next generation of wireless (WiFi 6) AP for businesses looking for a most economical upgrade path to 11ax. Its built-in 2nd Generation WiFi 6 (Qualcomm 802.11ax 2.0) chipset allows the access point to take advantage of the full range of WiFi 6 technologies including uplink OFDMA and MU-MIMO which can’t be found in earlier releases of 802.11ax products. Also, it uses the second generation transmit beamforming technology incorporating Low End Sensitivity Improvements and Time Domain Channel Smoothing allowing data rates to increase for not only MUMIMO clients, but for all existing ones as well.

The NAX110AX has been designed to be highly efficient in PoE budget, allowing for an easy upgrade path for those wishing to experience all that WiFi6 has to offer without the need to upgrade existing PoE+ switches.

The NWA110AX with NebulaFlex offers the full flexibility for users to switch among standalone or cloud-managed modes.

  • Dual-radio (dual 2×2 MIMO) 802.11ax AP provides maximum data rate of 1775 Mbps
  • OFDMA is arguably the best innovation of WiFi, delivering the highest performance and low latency for all scenarios
  • NebulaFlex allows users to switch between standalone or intuitive Nebula cloud managed modes as needed
  • Advanced Cellular Coexistence minimizes interferences from 4G/5G cellular networks
  • The latest WPA3 security protocol provides safer connectivity
  • Next generation beamforming technology delivers maximum coverage
Product name
Description 802.11ax (WiFi 6) Dual-Radio PoE Access Point
Wireless
Standard IEEE802.11 ax/ac/n/g/b/a
MIMO MU-MIMO
Wireless speed 2.4GHz: 575Mbps
5GHz: 1200Mbps
Frequency band

2.4 GHz (IEEE 802.11 b/g/n)

  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz

5 GHz (IEEE 802.11 a/n/ac)

  • USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz
  • European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth 20-, 40- and 80-MHz
Conducted typical transmit output power US (2.4GHz/5GHz): 23/23dBm
EU (2.4GHz/5GHz): 20/22dBm
RF Design
Antenna type 2×2 MIMO optimized Antenna
MTBF 635,837
Antenna gain 2.4GHz: Peak Gain 5dBi
5GHz: Peak Gain 6dBi
Minimum Receive sensitivity Min. Rx sensitivity up to -101 dBm
WLAN feature
Band Steering Yes
WDS/Mesh Yes (V6.10)
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v
DCS Yes
Load balancing Yes
Security
Wireless Security
  • WEP
  • WPA
  • WPA2-PSK
  • WPA3
Authentication
  • WPA
  • WPA2-Enterprise
  • EAP
  • IEEE 802.1X
  • RADIUS authentication
Access management
  • L2-isolation
  • MAC filtering
Networking
IPv6 Yes
VLANs Yes
WMM Yes
U-APSD Yes
DiffServ marking Yes
Management
Physical Specifications
Item Dimensions (WxDxH)(mm/in.)
180 x 180 x 39 / 7.09 x 7.09 x 1.54
Weight (g/lb.)
453g/1
Packing Dimensions (WxDxH)(mm/in.)
229 x 216 x 64 / 9.02 x 8.5 x 2.52
Weight (g/lb.)
770g/1.7
Included accessories
  • Mount plate
  • Mounting screws
  • power adapter
Physical Interfaces
Ethernet port
  • 1 x 10/100/1000M LAN
Power
  • PoE (802.3)at: power draw 17 W
  • DC input : 12 VDC 1.5A
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 95% (non-condensing)
Storage Temperature
-30°C to 70°C/-22°F to 158°F
Humidity
10% to 90% (non-condensing)
Certifications
Radio
  • FCC Part 15C
  • FCC Part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
EMC
  • FCC Part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55022
  • EN55024
  • EN61000-3-2/-3
  • EN60601-1-2
  • BSMI CNS13438
Safety
  • Safety EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-

NWA110AX Datasheet